- Dimensjoner: 57-406 (20×2.15)
- dekktrykk: 2.8-4.6 Bar
- Mark: Kenda
- Farge: Svart med hvit tekst
- Passer U1
Tires from Kenda adapted for U1.
39 på lager
Unscrew the rim from the frame.
To replace the rear tire, the engine must be disconnected. You do this by unplugging the plug that sits about 20cm into the cable. Start by removing all air from the tire by taking something pointed and pressing the «spike» in the valve. Then remove the old tire using a tire breaker, be careful when you can easily damage the hose.
Then, put on the oak cover, the red strap that comes with it, then start pulling one side of the tire by hand. Then install the hose but a little air in to reduce the risk of squeezing the hose. Then use the tire breaker to get on the other side of the tire.
Note: tool not included.
Your order is shipped from our warehouse Tuesdays & Thursdays.
The delivery time is normally 1-4 working days after the order has been shipped from the warehouse.